Bridge Saw & Waterjet Combination Machine
New Granite Countertop Fabrication Machinery
 SIMCOUSA is proud to bring you the first combination WaterJet and Bridge Saw machine designed specifically for the granite countertop fabricator. This machine gives you the capability to have two of the most versatile countertop fabricating machines in one. Twice the capability, half the shop space at a fraction of the cost of two separate machines. See these machines on display at the Coverings Show, StonExpo and The Big 5 Construction Show during 2008. Get the facts and specifications of the the SIMCOUSA WaterJet Bridge Saw. Phone SIMCOUSA 404-543-9107.
The SIMCOUSA CP35WJ Waterjet & Bridge Saw Combination machine used for the marble and granite countertop fabrication using a combination of a diamond bridge saw and waterjet. Use this combination machine as a bridge saw with up to 350mm diamond saw blade or use the waterjet milling or cutting.
Specifications (To convert mm to inches multiply mm x .0394)
Blade diameter: 350 mm
Power at blade: 7.5 kW
Table dimension (W X L): 1700 X 3200 mm
Maximum cut ( W X L X H) : 1700 X 3300 X 200 mm
Laser device: 10 mW
Water consumption: 20 Liter/ min
Pump: 37 kW
Engine X, Y: 1.5 kW at 3000 rpm
Engine Z, C : 1.0 kW at 3000 rpm
Pnuematic saw head turn: 0 – 90 degrees
Saw head tilt: 0 – 45 degrees for miters (optional)
|
